Back to All Engines
V2403-M-T-E3B
V2403-M-T-E3B
V2403-M-T-E3B
V2403-M-T-E3B
V2403-M-T-E3B
V2403-M-T-E3B
V2403-M-T-E3B
V2403-M-T-E3B
V2403-M-T-E3B
V2403-M-T-E3B
Industrial

V2403-M-T-E3B

Vertical, water cooled 4-cycle diesel engine

Power:
59.0 HP / 2700 RPM
Emission Regulations:
EPA/CARB interim Tier 4 + EU Stage IIIA
Contact Us Add to Compare

Features At A Glance

Emissions

V2403-M turbocharged engines comply with EPA / CARB interim Tier 4 + EU Stage IIIA emissions regulations.

Durable Power

The Kubota V2403-M-T engine is a high power density engine that delivers the highest output within the Kubota 03-M Series. By expanding the bore and stroke, Kubota has increased engine displacement. The cooling water passages between the cylinder bores features Kubota痴 original casting technology as a countermeasure against the heat load caused by high power density, providing both superior endurance and reliable engine performance. With numerous features such as a built-in solenoid, low fan position, and single-side serviceability, this engine provides excellent performance and flexibility.

Clean and Quiet Power

Kubota痴 original E-TVCS (Three Vortex Combustion System) has been improved. The airflow, combustion chamber, and piston recess have been optimized to provide lower particulate matter (PM) levels. The half-float valve cover and MoS2-coated pistons reduce noise levels and decrease vibrations transmitted from the valve area, providing enhanced noise reduction.

Option

Kubota 03-M Series engines offer side power take-off (PTO) in response to the trend of the use of hydraulic control devices in industrial machines. A hydraulic pump can be installed at the two side PTO locations. A direct injection engine is also available.

Specs & Compare

Compare Kubota Engines
Engine Model
V2403-M-T-E3B
V2403-M-T-E3B
Emission Regulations EPA/CARB interim Tier 4 + EU Stage IIIA
Type Vertical, water cooled 4-cycle diesel engine
Cylinders 4
Bore and Stroke 3.43 x 4.031 in
Displacement 148.5 cu.in.
Aspiration Turbocharged
Aftertreatment -
Rated Output/Speed*1 59.0 HP / 2700 RPM
Maximum Torque/Speed*1 122.0 lb-ft / 1800 RPM
Combustion System Indirect injection
Fuel System In-line pump
Length × Width × Height**
(without after treatment unit)		 25.4 x 19.5 x 28.5 in
Length × Width × Height***
(with after treatment unit)		 -
Dry Weight 443 lbs

Specifications are subject to change without notice.
Dimensions and dry weight are according to Kubota's standard specification.
Dimensions and weight depend on completed specifications.

1: SAE J1995 gross intermittent
*2: Exclude cooling fan and exclude aftertreatment unit
*3: Exclude cooling fan and include aftertreatment unit on engine

Compare This Engine

Series Lineup or Related Engines

V2403-M-DI-E3B

V2403-M-DI-E3B

Power:
48.9 HP / 2700 RPM
Emission Regulations:
  • EPA interim Tier 4 level
  • CARB interim Tier 4 level
  • EU Stage IIIA
View Details
V2403-M-DI-T-E3B

V2403-M-DI-T-E3B

Power:
48.9 HP / 2200 RPM
Emission Regulations:
  • EPA interim Tier 4 level
  • CARB interim Tier 4 level
  • EU Stage IIIA
View Details
V2403-M-E3B

V2403-M-E3B

Power:
48.9 HP / 2700 RPM
Emission Regulations:
  • EPA interim Tier 4 level
  • CARB interim Tier 4 level
  • EU Stage IIIA
View Details
V2403-CR-T-E4B

V2403-CR-T-E4B

Power:
65.2 HP / 2700 RPM
Emission Regulations:
  • EPA Tier 4
  • CARB Tier 4
  • EU Stage IIIB,EU StageV
View Details