Back to All Engines
V3307-DI-T-E3B
V3307-DI-T-E3B
V3307-DI-T-E3B
V3307-DI-T-E3B
V3307-DI-T-E3B
V3307-DI-T-E3B
V3307-DI-T-E3B
V3307-DI-T-E3B
V3307-DI-T-E3B
V3307-DI-T-E3B
Industrial

V3307-DI-T-E3B

Vertical, water cooled 4-cycle diesel engine

Power:
74.3 HP / 2600 RPM
Emission Regulations:
EPA/CARB interim Tier 4 + EU Stage IIIA
Contact Us Add to Compare

Features At A Glance

Proven Reliability and Technology

The Kubota 07 Series has been developed to meet the various requirements of a wide range of industrial applications. Kubota痴 unique cylinder block design was developed using our original casting technology, enabling larger displacement within the current 2.4L compact engine package. The improved cooling system, with a main water gallery and water passages between cylinder bores as a heat load countermeasure, provides high power density and superior endurance in the reliable Kubota 07 Series.

Emissions

Kubota 07 Series engines comply with EPA / CARB interim Tier 4 + EU Stage IIIA level emissions regulations. These engines meet emissions regulations with minimal additional required devices. For example, NOx is reduced by mechanical means alone, including the use of a compact cooled exhaust gas recirculation (EGR) system.

Clean and Quiet Power

Kubota痴 original E-CDIS (Center Direct Injection System) combustion system, renowned for the clean combustion it provides for the Kubota V3 (DI) Series, has been updated. The fuel injection pressure has been increased and the combustion chamber redesigned to achieve lower particulate matter (PM) levels, resulting in better conditions. In addition, these engines have been designed to reduce transmitted vibrations and radiated sound, resulting in low noise levels.

Options

A side PTO option is available. Kubota 07 Series engines offer a power take-off (PTO) located at the gear train on the flywheel side that is designed to enable compact positioning of PTO hydraulic devices. In response to the trend of the use of hydraulic control devices in industrial machines, we have made it possible to install up to three hydraulic pumps with different capacities. Fan positions are available at two heights to enable two types of equipment configurations.

Specs & Compare

Compare Kubota Engines
Engine Model
V3307-DI-T-E3B
V3307-DI-T-E3B
Emission Regulations EPA/CARB interim Tier 4 + EU Stage IIIA
Type Vertical, water cooled 4-cycle diesel engine
Cylinders 4
Bore and Stroke 3.70 x 4.724 in
Displacement 203.3 cu.in.
Aspiration Turbocharged
Aftertreatment -
Rated Output/Speed*1 74.3 HP / 2600 RPM
Maximum Torque/Speed*1 195.0 lb-ft / 1600 RPM
Combustion System Direct injection
Fuel System In-line pump
Length × Width × Height**
(without after treatment unit)		 25.8 x 19.7 x 29.1 in
Length × Width × Height***
(with after treatment unit)		 -
Dry Weight 591 lbs

Specifications are subject to change without notice.
Dimensions and dry weight are according to Kubota's standard specification.
Dimensions and weight depend on completed specifications.

1: SAE J1995 gross intermittent
*2: Exclude cooling fan and exclude aftertreatment unit
*3: Exclude cooling fan and include aftertreatment unit on engine

Compare This Engine

Series Lineup or Related Engines

Z482-E2B

Z482-E2B

Power:
13.3 HP / 3600 RPM
Emission Regulations:
  • EPA Tier 2 level
  • CARB Tier 2 level
View Details
Z482-E3B

Z482-E3B

Power:
13.3 HP / 3600 RPM
Emission Regulations:
  • EPA Tier 4 level
  • CARB Tier 4 level
View Details
Z482-E4B

Z482-E4B

Power:
13.3 HP / 3600 RPM
Emission Regulations:
  • EPA Tier 4 (NRTC/NTE test mode)
  • CARB Tier 4 (NRTC/NTE test mode)
  • EU Stage V
View Details
Z602-E2B

Z602-E2B

Power:
16.8 HP / 3600 RPM
Emission Regulations:
  • EPA Tier 2 level
  • CARB Tier 2 level
View Details